Table 185: Rip Configuration Fields - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 185: RIP Configuration Fields

Option
RIP
Comment
Metric In
Message Size
Hold Down
Route Timeout
Update Interval
Authentication Type
Authentication Key
Graceful Restart
Group
Import
Receive
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies the comment for RIP.
Specifies the metric to add to incoming
routes when advertising into RIP routes
that were learned from other protocols.
Specifies the number of route entries to
be included in every RIP update
message.
Time period the expired route is retained
in the routing table before being
removed.
Specifies the route timeout interval for
RIP.
Enables you to configure an update time
interval to periodically send out routes
learned by RIP to neighbors.
The type of authentication for RIP route
queries received on an interface.
Authentication key for RIP route queries
received on an interface.
Enables you to specify the graceful
restart parameters for RIP.
RIP neighbors that share an export policy
and metric. The export policy and metric
govern what routes to advertise to
neighbors in a given group.
Enables you to specify the import
policies to be configured on the peer.
Enables you to configure RIP receive
options.
Chapter 20: Configuring Protocols
Your Action
1. Enter the comment.
1. Specify the metric to add incoming
routes.
1. Enter the message size or select from
the list.
1. Enter the hold down value or select
from the list.
1. Enter the route timeout or select
from the list.
1. Enter the update interval or select
from the list.
1. Select authentication type from the
list.
1. Enter the authentication key.
1. Expand the tree and select
RIP
.
Graceful Restart
2. Enable the feature and set up the
graceful restart parameters.
1. Expand the RIP tree and select
2. Click the New button or select a
group and click Edit button.
3. Set up the Bfd Liveness Detection ,
Export, Import and Neighbor for RIP.
1. Expand the tree and select
RIP
.
Import
2. Specify the import policies.
1. Expand the tree and select
RIP
.
Receive
2. Specify the receive options.
Group .
337