Table of Contents
Advertisement
M-series and MX-series Devices
202
Click the Configuration tab. In the configuration tree, expand Forwarding Options >
3.
Helpers > Domain.
NOTE: For configuring TFTP, expand Forwarding Options > Helpers >
TFTP.
Add or modify settings as specified in Table 101 on page 202.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 101: DNS and TFTP Configuration Details
Task
Specify the interface for
monitoring and forwarding
DNS or TFTP requests.
Your Action
1.
In the Comment box, enter the comment.
2. In the Description box, enter the description of BOOTP, DHCP,
Domain Name System (DNS), or Trivial File Transfer Protocol
(TFTP) service, or of an interface that is configured for the
service.
3. Click Interface next to Domain.
4. Click Add new entry next to Interface.
5. Expand Interface.
6. In the Name box, enter the interface for a DHCP and BOOTP
relay agent.
7. In the Comment box, enter the comment.
8. Select the No Listen check box to disable recognition of DNS
requests or stop packets from being forwarded on a logical
interface, a group of logical interfaces, or a router.
9. Select the Broadcast check box to issue the DHCP or BOOTP
request as a broadcast message.
10. In the Descriptions box, enter the description of BOOTP, DHCP,
Domain Name System (DNS), or Trivial File Transfer Protocol
(TFTP) service, or of an interface that is configured for the
service.
11. Click Server next to Interface.
12. In the Comment box, enter the comment.
13. In the Address box, enter the address of the server.
14. Expand Server.
15. Click Logical System next to Server.
16. Select logical-system or routing-instance.
17. Click Server next to Domain.
18. In the Comment box, enter the comment.
19. In the Address box, enter the address of the server.
20. Expand Server.
21. Click Logical System next to Server.
22. Select logical-system or routing-instance.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
