Table of Contents
Advertisement
M-series and MX-series Devices
Generating Internal Events (NSM Procedure)
Related
Documentation
Configuring Event Policy (NSM Procedure)
156
To generate an internal event, based on a time interval or the time of day, you can use
the generate event option.
To generate internal events in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Event Options.
3.
Select Generate Event.
4.
Add or modify settings as specified in Table 75 on page 156.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 75: Generate Event Details
Task
Generate an internal event,
based on a time interval or
the time of day.
Configuring Destinations for File Archiving (NSM Procedure) on page 153
Configuring Event Script (NSM Procedure) on page 154
Configuring Event Policy (NSM Procedure) on page 156
Configuring Event Policy Tracing Operations (NSM Procedure) on page 159
Event policies can listen for specific events, create log files, invoke JUNOS commands,
and invoke event scripts.
To configure an event policy in NSM:
Your Action
1.
In the Name box, enter the name of an internally generated
event
2. In the Comment box, enter the comment for the generate event.
3. Click Time of Day next to generate-event and select one of the
following:
time-of-day—To configure a time of day at which to generate
a particular event.
time-interval—To configure a frequency at which to generate
a particular event.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
