Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 244

M-series and MX-series Devices
Related
Documentation
208
Table 105: Port Mirroring Configuration Details (continued)
Task
Configure traffic sampling
tracing operations.
Configuring Per-Flow and Per-Prefix Load Balancing (NSM Procedure) on page 205
Configuring Load Balancing Using Hash Key (NSM Procedure) on page 196
Specifying Address Family for Filters (NSM Procedure) on page 195
Your Action
1. In the Comment box, enter the comment for traceoptions.
2. Click File next to Traceoptions.
3. In the Comment box, enter the comment for the file.
4. In the Filename box, enter the name of the file containing the
trace information.
Default: /var/log/sampled
5. In the Size box, enter the maximum size of each traffic
sampling file or trace log file, in kilobytes (KB), megabytes
(MB), or gigabytes (GB).
Syntax: xk to specify KB, xm to specify MB, or xg to specify GB
Range: 10 KB through the maximum file size supported on your
router
Default: 1 MB for sampling data; 128 KB for log information
6. From the Files list, select the maximum number of traffic
sampling or trace log files.
Range: 1 through 100 files
Default: 5 files for sampling output; 10 files for trace log
information
7. Select one of the following:
world-readable—To enable unrestricted file access.
no-world-readable—To restrict file access to owner.
Copyright © 2010, Juniper Networks, Inc.