Table of Contents
Advertisement
Table 340: Internet Options Configuration Details (continued)
Option
None /
ipv6-reject-zero-hop-limit /
no-ipv6-reject-zero-hop-limit
Ipv6 Duplicate Addr Detection
Transmits
None /
ipv6-path-mtu-discovery /
no-ipv6-path-mtu-discovery
Ipv6 Path Mtu Discovery
Timeout
No Tcp Reset
Internet Options > Icmpv4 Rate Limit / Icmpv6 Rate Limit
Comment
Packet Rate
Bucket Size
Internet Options > Source Port
Comment
Upper Limit
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies that you can enable and disable
rejection of incoming IPv6 packets that
have a zero hop-limit value in their header.
Specifies the number of attempts for IPv6
duplicate address detection that can be
controlled.
Specifies that you can configure path MTU
discovery for IPv6 packets.
Specifies the IPv6 path MTU discovery
timeout.
Specifies not to send the reset RST TCP
packet for packets sent to non-listening
ports.
Supplies a descriptive comment for the
ICMPv4/ICMPv6 rate limit.
Specifies the ICMP rate-limiting packets
earned per second.
Specifies the maximum bucket size for the
ICMP rate limit.
Supplies a descriptive comment for the
source port.
Specifies the upper limit of the source port
selection range.
Chapter 25: Configuring System
Your Action
Select an option.
ipv6-reject-zero-hop-limit-Rejection of
incoming IPv6 packets that have a zero
hop-limit value is enabled.
no-ipv6-reject-zero-hop-limit-Rejection of
incoming IPv6 packets that have a zero
hop-limit value is disabled.
None- Rejection of incoming IPv6 packets that
have a zero hop-limit value is neither enabled
nor disabled.
Set the number of attempts. Range: 0 -
4294967295. Default value is 3.
Select an option.
ipv6-path-mtu-discovery-IPv6 path MTU
discovery is enabled.
no-ipv6-path-mtu-discovery-IPv6 path MTU
discovery is disabled.
None-IPv6 path MTU discovery is neither
enabled nor disabled.
Set the IPv6 path MTU discovery timeout. Range:
0 - 4294967295. Default value is 10.
Select an option from the list.
(Optional) Enter a comment.
Set the packet rate value. Range: 0 -
4294967295. Default value is 1000.
Set the bucket size value. Range: 0 -
4294967295. Default value is 5.
(Optional) Enter a comment.
Set the upper limit value. Range: 5000 - 65535.
Default value is none.
547
Advertisement
Table of Contents
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - AQL EVENT AND FLOW QUERY CLI GUIDE
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - EVENT CATEGORY CORRELATION REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1