Table of Contents
Advertisement
M-series and MX-series Devices
Related
Documentation
Configuring Border Signaling Gateways (NSM Procedure)
Configuring Gateway Properties (NSM Procedure)
432
OK—To save the changes.
Cancel—To cancel the modifications.
Table 258: Adaptive Services Pics Configuration Details
Task
Configure adaptive services
or multiservices PIC tracing
operations.
Configuring a Service Set (NSM Procedure) on page 494
Tracing Services PIC Operations (NSM Procedure) on page 458
You can configure border signaling gateways using this option. See the following topics:
Configuring Gateway Properties (NSM Procedure) on page 432
Configuring Gateway (NSM Procedure) on page 433
Configuring an Admission Controller (NSM Procedure) on page 433
Configuring Session Policy Decision Function (NSM Procedure) on page 434
Your Action
1.
Click Traceoptions next to Adaptive Services Pics.
2. Select the No Remote Trace check box to disable remote
tracing.
3. Expand Traceoptions.
4. Click File next to Trace Options.
5. In the Comment box, enter the comment.
6. In the Filename box, enter the name of the file to receive the
output of the tracing operation.
7. In the Comment box, enter the comment.
8. In the Size box, enter the maximum size of each trace file in
kilobytes (KB), megabytes (MB) or gigabytes (GB).
Range: 2 through 1000 files
Default: 3 files
9. From the Files list, select the maximum number of trace files.
10. Select one of the following:
no-world-readable—To allow any user to read the log file.
world-readable—To prevent any user from reading the log
file.
11. Click Flag next to Trace Options.
12. Click
next to flag.
Add new entry
13. From the Name list, select a tracing operation to perform.
14. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
