Configuring Pool Match Order (Nsm Procedure); Configuring The Virtual Network (Nsm Procedure); Table 314: Pool Match Order Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 314: Pool Match Order Configuration Details

Option Function
Name Specifies the name of the pool match order.
Comment Supplies a descriptive comment for the pool match order.
Copyright © 2010, Juniper Networks, Inc.

Configuring Pool Match Order (NSM Procedure)

This section provides information on configuring pool match order for home agent.
To configure the pool match order:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the pool match order.
Click the Configuration tab. In the configuration tree, select Services > Mobile Ip >
3.
Home Agent > Pool Match Order.
Add or modify settings as specified in Table 314 on page 509.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the pool match order options.

Configuring the Virtual Network (NSM Procedure)

This section provides information on configuring virtual network for home agent.
To configure the virtual network:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the virtual network.
Click the Configuration tab. In the configuration tree, select Services > Mobile Ip >
3.
Home Agent > Virtual Network .
Enter a comment in the Virtual Network workspace that describes the virtual network.
4.
Add or modify the settings as specified in Table 315 on page 510.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the virtual network options.
Chapter 23: Configuring Services
Your Action
Select the name from the list.
Enter a comment.
509