Table of Contents
Advertisement
Tracing MPLS Packets and Operations (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 173: MPLS Statistics Configuration Details
Task
Enable MPLS statistics
collection and reporting.
Configure the file.
You can trace MPLS packets and operations using the Traceoptions option.
To trace MPLS packets and operations in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols.
3.
Select Mpls.
4.
Add or modify settings as specified in Table 174 on page 322.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Click Statistics next to Mpls.
2. In the Comment box, enter the comment.
3. From the Interval list, select the interval at which to periodically
collect statistics.
Range: 1 through 65,535
Default: none
4. Select the Auto Bandwidth check box to collect statistics
related to automatic bandwidth.
1.
Click File next to Statistics.
2. In the Comment box, enter the comment.
3. In the Filename box, enter the name of the file to receive the
output.
4. In the Size box, enter the maximum size of each trace file, in
kilobytes (KB), megabytes (MB), or gigabytes (GB).
5. From the Files list, select the maximum number of trace files.
Range: 2 through 1000
6. Select one of the following:
world-readable—To enable unrestricted file access.
no-world-readable—To restrict file access to owner.
Chapter 20: Configuring Protocols
321
Advertisement
Table of Contents
