Table 269: Traceoption Bsg Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
448

Table 269: Traceoption BSG Configuration Details

Task
Configure border signaling
gateway (BSG) tracing
operations.
Configure trace level options
for the datastore component
of the BSG.
Your Action
1. Click Add new entry next to Gateway.
2. Click Traceoptions next to gateway.
3. Click Flag next to Traceoptions.
4. In the Comment box, enter the comment.
5. From the Minimum list, select the severity of the event being
traced.
debug—Logging of all code flow of control.
trace—Logging of program trace for START, and EXIT
macros.
info—Summary logs for normal operations. e.g. the policy
decisions made for a call.
warning—Failure-recovery or failure of an external entity.
error—Failure with short-term effect, such as failed
processing of a single call.
6. From the Session Trace list, select the minimum trace level
for all session-trace messages.
1. Click Add new entry next to Gateway.
2. Click Traceoptions next to gateway.
3. Click Flag next to Traceoptions.
4. Click Datastore next to Flag.
5. In the Comment box, enter the comment.
6. From the Minimum list, select the minimum trace level for all
datastore messages.
7. From the Data list, select the trace level for the data
subcomponent.
8. From the Handle list, select the trace level for the access API
for the database.
9. From the Db list, select the trace level for the wrapper layer
around the database.
Copyright © 2010, Juniper Networks, Inc.