Figure 6: Mpls Configuration In Nsm - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices

Figure 6: MPLS Configuration in NSM

Related
Documentation
48
In addition, Figure 6 on page 48 shows parts of the configuration tree that are grayed out,
indicating that those particular parameters are not supported for the M-series and
MX-series devices.
About Device Configuration on page 43
M-series and MX-series Device Configuration Settings Supported in NSM on page 44
Configuring Device Features on page 46
Copyright © 2010, Juniper Networks, Inc.