Table of Contents
Advertisement
Table 316: Peer Configuration Details (continued)
Option
host
mobility-agent
Peer > Nai > Spi > Key
Comment
Peer > Nai > Spi > Key > Hex
None
hex
ascii
Peer > Nai > Spi > Replay Method
Comment
Peer > Nai > Spi > Replay Method >
None
timestamp
none (configuration)
Configuring Traceoptions (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Function
Enables the host entity type.
Enables the mobility-agent entity type.
Specifies the comment for the key.
Specifies that neither the HEX or ASCII key is
enabled.
Enables hexadecimal text key.
Enables ASCII text key.
Specifies the comment for the replay method.
Timestamp
Specifies that the timestamp option is not enabled
Enables the timestamp option.
Specifies that the configuration option is not
selected.
The traceoptions feature allows you to configure file and flag options.
To configure traceoptions feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure traceoptions.
Click the Configuration tab. In the configuration tree, select Services > Mobile IP >
3.
Traceoptions.
Chapter 23: Configuring Services
Your Action
Select the option.
Select the option.
Enter a comment.
Select the option.
1.
Select the option.
2. Enter a comment and a hexadecimal
value.
1.
Select the option.
2. Enter a comment and an ASCII value.
Enter a comment.
Select the option.
1.
Select the option.
2. Enter a comment for the timestamp.
3. Enter the duration within which the
timestamp must be received.
Range: 1 through 255.
Select the option.
513
Advertisement
Table of Contents
