Configuring Protocol Family (Tcc) Information For The Logical Interface (Nsm; (Nsm Procedure); Configuring The Traffic Shaping Profile (Nsm Procedure); Table 120: Tcc Family Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual
Network and security manager
Table of Contents
Advertisement
M-series and MX-series Devices
Configuring the Traffic Shaping Profile (NSM Procedure)
234
Configuring Protocol Family (TCC) Information for the Logical Interface (NSM
Procedure)
To configure tcc family information in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Interfaces.
3.
Select Interface.
4.
Add or modify settings as specified in Table 120 on page 234.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 120: TCC Family Configuration Details
Task
Configure tcc information.
Apply a policer to an
interface.
Configure Ethernet TCC
encapsulation.
When you use an ATM encapsulation on ATM1 and ATM2 IQ interfaces, you can define
bandwidth utilization, which consists of either a constant rate or a peak cell rate, with
sustained cell rate and burst tolerance.
To configure traffic shaping profile in NSM:
Your Action
1.
Click Add Interface next to Interface.
2. In the Add Interface Dialog box, enter the interface name.
3. Click Unit next to interface.
4. Click Add new entry next to Unit.
5. Click Family next to Unit.
6. Expand Family.
7. Click Tcc next to Family.
8. In the Comment box, enter the comment.
1.
Click Policer next to Tcc.
2. In the Comment box, enter the comment.
3. In the Input box, enter the name of one policer to evaluate when
packets are received on the interface.
4. In the Output box, enter the name of one policer to evaluate
when packets are transmitted on the interface.
1.
Click proxy next to TCC.
2. In the Comment box, enter the comment.
3. Click Remote next to TCC.
4. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
