Policy References; Policy Management Configuration Tasks - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

JUNOSe 11.1.x Policy Management Configuration Guide

Policy References

For more information about policy management, see the following resources:

Policy Management Configuration Tasks

Perform the required tasks and also any optional tasks that you need for your policy
management configuration:
1.
2.
3.
4.
5.
6.
6
Policy References
See the ERX Module Guide for modules supported on ERX7xx models, ERX14xx
models, and the Juniper Networks ERX310 Broadband Services Router.
See the E120 and E320 Module Guide for modules supported on the Juniper
Networks E120 and E320 Broadband Services Routers.
RFC 2474 Definition of the Differentiated Services Field (DS Field) in the IPv4
and IPv6 Headers (December 1998)
RFC 2475 An Architecture for Differentiated Services (December 1998)
RFC 2697 A Single Rate Three Color Marker (September 1999)
RFC 2698 A Two Rate Three Color Marker (September 1999)
RFC 3198 Terminology for Policy-Based Management (November 2001)
Create a CLACL (optional).
See "Classifier Control Lists Overview" on page 7
Create a rate-limit profile (optional).
See "Creating Rate-Limit Profiles" on page 77
Create a policy list.
See "Policy Lists Overview" on page 17
Create a classifier group.
See "Classifier Groups and Policy Rules Overview" on page 31
Create one or more policy rules within the classifier group.
See "Rate Limits for Interfaces Overview" on page 62
Apply a policy list to an interface or profile.
See "Classifier Groups and Policy Rules Overview" on page 31