Table of Contents
Advertisement
Table 351: TACACS+ Options Configuration Details (continued)
Option
Function
Service Name
Specifies the TACACS+ service name.
None
Specifies hostname information.
no-cmd-attribute-value
Specifies the command attribute value to an empty string
in the start and stop request for TACACS+ accounting.
This option enables logging of accounting records in the
correct log file on a TACACS+ server.
exclude-cmd-attribute
Specifies to exclude the command attribute value
completely from start and stop accounting records. This
option enables logging of accounting records in the correct
log file on a TACACS+ server.
Related
Documentation
Configuring TACACS+ Server (NSM Procedure)
Table 352: TACACS+ Server Configuration Details
Option
Function
Name
Specifies the TACACS+ authentication server address.
Comment
Supplies a descriptive comment of the TACACS+ server.
Copyright © 2010, Juniper Networks, Inc.
Configuring Root Authentication (NSM Procedure) on page 558
Configuring RADIUS Server (NSM Procedure) on page 557
Configuring Static Host Mapping (NSM Procedure) on page 559
To configure a TACACS+ server:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab. Then double-click the device for which you want to configure
2.
the TACACS+ server.
Click the Configuration tab. In the configuration tree, select System > Tacplus Server.
3.
Add or modify settings as specified in the Table 352 on page 561.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the TACACS+ server settings.
Chapter 25: Configuring System
Your Action
Enter the TACACS+ service name.
Select the None check box to enable
this feature.
Select the no-cmd-attribute-value
check box to enable this feature.
Select the exclude-cmd-attribute
check box to enable this feature.
Your Action
Enter the TACACS+ authentication server
address name.
(Optional) Enter a comment.
561
Advertisement
Table of Contents
