Table of Contents
Advertisement
M-series and MX-series Devices
Configuring the Interface Profile (NSM Procedure)
76
Table 32: Filter Profile Configuration Details
Task
Configure a filter profile.
Configure the counters.
An interface profile specifies the information collected and written to a log file. You can
configure a profile to collect error and statistic information for input and output packets
on a particular physical or logical interface.
To configure the interface profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Accounting Options.
3.
Select Interface Profile.
4.
Add or modify the settings as specified in Table 33 on page 77.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
1.
Click Add new entry next to Filter Profile.
2. Expand filter-profile.
3. In the Name box, enter the filename.
4. In the Comment box, enter the comment for the file.
5. In the File box, enter the name of the file.
6. From the Interval list, select the amount of time between each
collection of statistics.
Range: 1 through 1048576 minutes
Default: 30 minutes
1.
Click Counters next to filter-profile.
2. Click Add new entry next to Counters.
3. In the Name box, enter the site name.
4. In the Comment box, enter the comment.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
