Table of Contents
Advertisement
M-series and MX-series Devices
328
Table 179: MSDP Peer Configuration Details (continued)
Task
Configure MSDP tracing
options.
Configuring a Routing Table Group with MSDP (NSM Procedure)
To associate with MSDP a routing table group that imports and exports routes into the
specified routing table group, you can use the Rib Group option.
To associate a routing table group with MSDP in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Protocols.
3.
Select Msdp.
4.
Add or modify settings as specified in Table 180 on page 328.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 180: Rib Group Configuration Details
Task
Associate a routing table
group with MSDP.
Your Action
1.
Click Traceoptions next to Peer.
2. In the Comment box, enter the comment for the traceoptions.
3. Click File next to Traceoptions.
4. In the Comment box, enter the comment for the filename.
5. In the Filename box, enter the name of the file to receive the
output of the tracing operation.
6. In the Size box, enter the maximum trace file size.
7. From the Files list, select the maximum number of trace files.
8. Select one of the following:
no-world-readable—To restrict the file access to owner.
world-readable—To enable unrestricted access.
9. Click Flag next to Traceoptions.
10. Click Add new entry next to Flag.
11. From the Name list, select the flag to perform the trace
operation.
12. In the Comment box, enter the comment for the flag.
13. Select the corresponding modifier for the tracing flag.
Your Action
1.
Click Rib Group next to Msdp.
2. In the Comment box, enter the comment.
3. In the Ribgroup Name box, enter the name of the routing table
group.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
