Table of Contents
Advertisement
M-series and MX-series Devices
Configuring Certificates (NSM Procedure)
Table 222: Certificates Configuration Details
Option
Comment
Path Length
390
Table 221: Security Authentication Key Configuration Details
Task
Configure authentication
key updates for BGP and
LDP routing protocols.
The certificates feature allows you to configure the certification authority and local
certificate.
To configure certificates feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the certificates feature.
Click the Configuration tab. In the configuration tree, select Security > Certificates.
3.
Configure the options as specified in Table 222 on page 390.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the certificates parameters.
Function
Supplies a descriptive comment for the
certificates.
Specifies the maximum length of the certificate
path.
Your Action
1.
Expand Authentication Key Chains.
2. Click Key Chain next to Authentication Key Chains.
3. Click Add new entry next to Key Chains.
4. Expand key-chain.
5. In the Name box, enter the keychain name.
6. In the Comment box, enter the comment.
7. In the Description box, enter the text description of the
authentication keychain in quotes.
8. From the Tolerance list, select the clock skew tolerance.
Range: 0 through 999999999
9. Click Key next to key-chain.
10. Click Add new entry next to Key.
11. From the Name list, select the key value.
12. In the Comment box, enter the comment.
13. In the Secret box, enter the secret for the key in encrypted text.
14. In the Start Time box, enter the start time in UTC (Coordinated
Universal Time).
Your Action
(Optional) Enter a comment.
Set the maximum length of the certificate
path. Range: 0 - 15.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
