Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 102

M-series and MX-series Devices
66
Table 23: RADIUS Parameter Configuration Details (continued)
Task
Configure the router to
exclude the specified
attributes from the specified
type of RADIUS message.
Your Action
1. Click Exclude next to Radius.
2. In the Comment box, enter the comment.
3. From the listed RADIUS attribute type, select the attributes
to be excluded.
RADIUS attribute types are:
accounting-authentic—RADIUS attribute 45,
Acct-Authentic
accounting-delay-time—RADIUS attribute 41,
Acct-Delay-Time
accounting-session-id—RADIUS attribute 44,
Acct-Session-Id
accounting-terminate-cause—RADIUS attribute 49,
Acct-Terminate-Cause
called-station-id—RADIUS attribute 30, Called-Station-Id
calling-station-id—RADIUS attribute 31, Calling-Station-Id
class—RADIUS attribute 25, Class
dhcp-gi-address—Juniper VSA 26-57, DHCP-GI-Address
dhcp-mac-address—Juniper VSA 26-56,
DHCP-MAC-Address
Dhcp Options— Excludes RADIUS attribute 26-55
event-timestamp—RADIUS attribute 55, Event-Timestamp
framed-ip-address—RADIUS attribute 8,
Framed-IP-Address
framed-ip-netmask—RADIUS attribute 9,
Framed-IP-Netmask
input-filter—Juniper VSA 26-10, Ingress-Policy-Name
input-gigapackets—Juniper VSA 26-42,
Acct-Input-Gigapackets
input-gigawords—RADIUS attribute 52,
Acct-Input-Gigawords
interface-description—Juniper VSA 26-53, Interface-Desc
nas-identifier—RADIUS attribute 32, NAS-Identifier
nas-port—RADIUS attribute 5, NAS-Port
nas-port-id—RADIUS attribute 87, NAS-Port-Id.
nas-port-type—RADIUS attribute 61, NAS-Port-Type
output-filter—Juniper VSA 26-11, Egress-Policy-Name
output-gigapackets—Juniper VSA 25-43,
Acct-Output-Gigapackets
output-gigawords—RADIUS attribute 53,
Acct-Output-Gigawords
Copyright © 2010, Juniper Networks, Inc.