Configuring Internet Options (Nsm Procedure); Table 339: Inet6 Backup Router Configuration Details; Table 340: Internet Options Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Table 339: Inet6 Backup Router Configuration Details

Option Function
Comment Supplies a descriptive comment of the Inet6 backup
router.
Address Specifies the address of the router to use while booting.
Destination Specifies the destination network that is reachable
through the router.
Related
Documentation

Configuring Internet Options (NSM Procedure)

Table 340: Internet Options Configuration Details

Option
Comment
Copyright © 2010, Juniper Networks, Inc.
Apply—Applies the Inet6 backup router settings.
Configuring the Internet options (NSM Procedure) on page 545
Configuring a Location (NSM Procedure) on page 548
Configuring a Login (NSM Procedure) on page 549
You can configure the system Internet Protocol (IP) options to protect the system against
certain types of Denial of Service (DoS) attacks.
To configure internet options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the internet options.
Click the Configuration tab. In the configuration tree, select System > Internet Options.
3.
Add or modify the settings as specified in Table 340 on page 545.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the internet options configuration settings.
Function
Supplies a descriptive comment for the
internet option.
Chapter 25: Configuring System
Your Action
(Optional) Enter a comment.
Enter an address name for the router.
Enter the destination name for the router.
Your Action
(Optional) Enter a comment.
545