Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual page 306

M-series and MX-series Devices
270
Table 140: LDP Configuration Details (continued)
Task
Specify merged next-hop
policy.
Your Action
1. Click Next Hop next to LDP.
2. In the Comment box, enter the comment.
3. Click Merged next to Next Hop.
4. In the Comment box, enter the comment.
5. Click Policy next to Merged.
6. Click Add after selecting a policy member from the Non
member list to add it to the Members list.
7. Click Remove after selecting a policy from the Members list
to remove it from the Members list.
8. Click Add All to add all the Non members to the Members list.
9. Click Remove All to remove all the members from the Members
list.
Copyright © 2010, Juniper Networks, Inc.