Configuring The Tcp Session Option (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Table 228: TCP MSS Configuration Details (continued)
Option Function
Mss Specifies the maximum segment size for all TCP
options.
Tcp Mss > Gre In
Enable Feature Enables the received Generic Routing Encapsulation
(GRE) feature.
Comment Supplies a descriptive comment for the received GRE.
Mss Specifies the maximum segment size for the received
GREs.
Tcp Mss > Gre Out
Enable Feature Enables the sent Generic Routing Encapsulation
(GRE) feature.
Comment Supplies a descriptive comment for the sent GREs.
Mss Specifies the maximum segment size for the sent
GREs.
Tcp Mss > Ipsec Vpn
Enable Feature Enables the IPsec VPN feature.
Comment Supplies a descriptive comment for the IPsec VPN.
Mss Specifies the maximum segment size for IPsec VPNs.

Configuring the TCP Session Option (NSM Procedure)

396
To configure the TCP session option:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the TCP session option.
Click the Configuration tab. In the configuration tree, select Security > Flow > Tcp
3.
Session.
Configure the options as specified in Table 229 on page 397.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Your Action
Set the MSS value. Range: 64 - 65535.
Select the Enable Feature check box to
enable this feature.
(Optional) Enter a comment.
Set the MSS value. Range: 64 - 65535.
Select the Enable Feature check box to
enable this feature.
(Optional) Enter a comment.
Set the MSS value. Range: 64 - 65535.
Select the Enable Feature check box to
enable this feature.
(Optional) Enter a comment.
Set the MSS value. Range: 64 - 65535.
Copyright © 2010, Juniper Networks, Inc.