Configuring Logical Interfaces (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Configuring Logical Interfaces (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Table 40: Forwarding Options Configuration Details (continued)
Task
Configuring relay option 60
information for forwarding
client traffic to specific
DHCP servers.
Configuring relay option 82
for a DHCP server.
Specifying the name of a
group of DHCP server
addresses for use by the
extended DHCP relay agent.
Configuring tracing
operations for extended
DHCP relay agent processes.
Apply a forwarding table
filter at the ingress of a
forwarding table.
Apply a forwarding table
filter to a flood table.
You can specify the logical interfaces to include in the bridge domain, VPLS instance, or
virtual switch.
To configure logical interfaces in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Bridge Domains.
3.
Select Domain.
4.
Add or modify settings as specified in Table 41 on page 88.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 10: Configuring Bridge Domains
Your Action
1. Click Relay option 60 next to Dhcp Relay.
2. For configuring relay option 60 information for forwarding client
traffic to specific DHCP servers, see "Configuring Relay Option
60 Information for Forwarding Client Traffic to Specific DHCP
Servers (NSM Procedure)" on page 191.
1. Click Relay option 82 next to Dhcp Relay.
2. For configuring relay option 82 for a DHCP server, see
"Configuring Relay Option 82 for a DHCP Server (NSM
Procedure)" on page 192.
1. Click Server Group next to Dhcp Relay.
2. For specifying the name of a group of DHCP server addresses
for use by the extended DHCP relay agent, see "Specifying the
Name of a Group of DHCP Server Addresses for Use by the
Extended DHCP Relay Agent (NSM Procedure)" on page 193
1. Click Traceoptions next to Dhcp Relay.
2. For configuring tracing operations for extended DHCP relay
agent processes see "Configuring Operations for Extended
DHCP Relay Agent Processes (NSM Procedure)" on page 194
1. Click Filter next to Forwarding Options.
2. In the Comment box, enter the comment.
3. From the Input list, select the name of the applied filter.
1. Click Flood next to Forwarding Options.
2. In the Comment box, enter the comment.
3. From the Input list, select the name of the forwarding table
filter.
87