Configuring Flag Options (Nsm Procedure); Configuring Ipsec (Nsm Procedure); Table 240: Flag Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

M-series and MX-series Devices
Table 239: File Configuration Details (continued)
Option Function
Match Specifies the regular expression for the lines to be logged.

Table 240: Flag Configuration Details

Option
Name
Comment
Related
Documentation

Configuring IPsec (NSM Procedure)

408

Configuring Flag Options (NSM Procedure)

To configure flag options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the flag options.
Click the Configuration tab. In the configuration tree, select Security > Ike >
3.
Traceoptions > Flag.
Add or modify setting as specified in Table 240 on page 408.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the flag settings.
Function
Specifies the trace flag name.
Supplies a descriptive comment for the trace flag.
Configuring an IPsec (NSM Procedure) on page 408
Configuring a PKI (NSM Procedure) on page 414
Configuring NAT (NSM Procedure) on page 419
The Internet Protocol Security (IPsec) feature allows you to configure policy, proposal,
traceoptions, VPN, and VPN monitor options.
To configure the IPsec feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the IPsec feature.
Click the Configuration tab. In the configuration tree, select Security > Ipsec.
3.
Your Action
Enter the match expression.
Your Action
Select a name from the list.
Enter a comment.
Copyright © 2010, Juniper Networks, Inc.