Mgtpvc Overview - ZyXEL Communications MSC1024G Series User Manual

Table 137 IMA > DTPVC Setup: Slot (continued)
LABEL
Next
Next 10
Index
Group
VPI / VC
Profile
Svid / Spri
Cvid / Cpri
MUX
Select

12.7 MGTPVC Overview

You can separate management traffic into a different VLAN from general traffic. By default,
the IES uses VLAN 1 for management traffic. The management PVC (MGTPVC) is dedicated
for management traffic transmission over an ATM network. The IMA line card supports
bridged and routed MGTPVCs.
Routed MGTPVC Configuration Example
If the remote IMA device uses routed encapsulated (RFC 1483) PVCs, you must configure the
IES to use routed MGTPVCs. Before configuring a routed MGTPVC, you have to know the IP
addresses of the remote IMA device and the management computer. In the following example,
your IMA line card (IMA-1) and the management computer (M) are located in the central
office site (CO). Their IP addresses are 192.168.1.1 and 192.168.1.3. IMA-2 is the remote
IMA device which uses 192.168.1.2 for the IP address in the remote site (RT).
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Click Next to show the following screen if the information cannot be displayed in
one screen.
Click Next 10 to show the following 10 pages of alarms.
This is the number of the DTPVC.
This is the number of an IMA group on the line card.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this group.
This field displays the ATM profile that this channel uses.
This field displays the Svid and Spri settings that this channel uses.
• Svid is the service provider's VLAN ID (the outer VLAN tag) that the line card
assigns to untagged frames received on this DTPVC.
• Spri is the IEEE 802.1p priority level for the service provider tag that the line
card adds to untagged frames that come in on this DTPVC. "0" is the lowest
priority level and "7" is the highest.
This field displays the Cvid and Cpri settings that this channel uses.
• Cvid is the customer VLAN ID (the inner VLAN tag) that the line card assigns
to untagged frames received on this DTPVC.
• Cpri field displays the IEEE 802.1p priority level for the customer tag that the
line card adds to untagged frames that come in on this DTPVC. "0" is the
lowest priority level and "7" is the highest.
This field displays the encapsulation type (llc or vc) for this channel.
Select one or more PVCs' check boxes and then use the Delete button to remove
it (or them). Use the Select All check box to select all of the PVCs for all of the line
card's groups.
Chapter 12 IMA Screens
319