Chapter 35 Sys Commands; Sys Commands Overview; Sys Commands Summary - ZyXEL Communications MSC1024G Series User Manual

C
H A P T E R
This chapter shows you how to use the

35.1 sys Commands Overview

The commands are for system management and maintenance.
sys
35.2 Commands Summary
sys
The following table lists the
administrator privilege level needed to use the command (H for high, M for middle or L for
low).
Table 348 sys Commands
COMMAND
sys aaa auth
acct commands
acct exec
MSC1000G/1024G/1224G Series User's Guide
sys Commands
commands.
sys
commands. The P column on the right indicates the
sys
DESCRIPTION
Specifies which method should be used
login <method1>
first, second, and third for the
[<method2>
authentication of login accounts. This is
[<method2>]]
used to determine a user can log into the
system or not.
method: local, radius, or tacacs+.
Displays what methods are used for
show
authentication.
Disables accounting of command
disable
sessions on the system.
Enables accounting of command sessions
enable <privilege>
and specifies the minimum privilege level
<isbroadcast>
(1~3) for the command sessions that
should be recorded. Optionally, sends
accounting information for command
sessions to all configured accounting
servers at the same time (1 or 0).
Disables accounting of administrative
disable
sessions via SSH, Telnet or console on
the system.
35
P
H
L
H
H
H
905