Figure 93 Loopback
The following table describes the labels in this screen.
Table 57 Loopback
LABEL
Loopback
8.4 IP Ping Screen
Click Diagnostic > IP Ping in the navigation panel to display this screen. Use this screen to
ping IP addresses.
Figure 94 IP Ping
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Select slot and port numbers from the Slot and Port drop-down list boxes.
In the Item drop-down list box, select the type of loopback test. Currently oam f5
loopback test is supported. An Operational, Administration and Maintenance Function
5 test is used to test the connection between two DSL devices. First, the DSL devices
establish a virtual circuit. Then the local device sends an ATM F5 cell to be returned by
the remote DSL device (both DSL devices must support ATM F5 in order to use this
test). The results ("Passed" or "Failed") display in the multi-line text box.
Enter a VPI/VCI to specify a PVC. Click Test to perform the loopback test.
Chapter 8 Diagnostic Screens
179