The following example configures H.248 interface 1 to use IP address 10.59.3.2, subnet mask
255.255.225.0, and VLAN ID 1.
ras> voip h248 interface ip 1 10.59.3.2/24 1
37.4.4 voip h248 interface mg disable command
Syntax:
voip h248 interface mg disable <id>
Use this command to have the specified H.248 interface's signaling card stop MG operation
and de-register from the MGC.
The following example has H.248 interface 1's signaling card stop MG operation and de-
register from the MGC.
ras> voip h248 interface mg disable 1
37.4.5 voip h248 interface mg enable command
Syntax:
voip h248 interface mg enable <id>
Use this command to have the specified H.248 interface's signaling card start MG operation
and register with the MGC.
The following example has H.248 interface 1's signaling card start MG operation and register
with the MGC.
ras> voip h248 interface mg enable 1
37.4.6 voip h248 interface mg set command
Syntax:
voip h248 interface mg set <id> <mg-name> <h248-profile> [<mg-port>]
Use this command to set the MG name, H.248 profile it uses, and port number an H.248
interface uses.
The following example sets H.248 interface 1's MG name to MG1 and sets it to use the
MEGACO H.248 profile.
ras> voip h248 interface mg set 1 MG1 MEGACO
37.4.7 voip h248 interface show command
Syntax:
voip h248 interface show [<id>]
MSC1000G/1024G/1224G Series User's Guide
Chapter 37 voip Commands
945