Chapter 18 VoIP
Table 301 VoIP > Localcall
LABEL
Apply
Cancel
18.14 The VoIP Interface Screen
Click VoIP > Interface to open the following screen. Use this screen to configure the system's
H.248 interfaces.
570
DESCRIPTION
Click Apply to save the changes in this screen to the system's volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save on
the navigation panel and then the Save button to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to start configuring the screen again.
MSC1000G/1024G/1224G Series User's Guide