ZyXEL Communications MSC1024G Series User Manual page 208

Chapter 10 Multicast Screens
Table 75 MVLAN Group Setup (continued)
LABEL
Apply
Cancel
Index
Start IP
End IP
Select
Select All
Delete
Cancel
208
DESCRIPTION
Click Apply to save the changes in this screen to the system's volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save
on the navigation panel and then the Save button to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to start configuring this section of the screen again.
This is the multicast group number (1 -16).
This is the beginning of the multicast IP address range.
This is the finish of the multicast IP address range.
Select the check box in the Select column for an entry and click Delete to remove
the entry.
Click this to select all entries in the table.
Select the radio button in the Select column for an entry. Click Delete to remove the
entry.
Click Cancel to start configuring this section of the screen again.
MSC1000G/1024G/1224G Series User's Guide