ZyXEL Communications MSC1024G Series User Manual page 215

Figure 126 ADSL Port Setup
The following table describes the fields in this screen.
Table 80 ADSL Port Setup
LABEL
Slot
Port
Load
Enable
Mode
ADSL Profile
Alarm Profile
Customer
Information
TEL
Advanced
Feature
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Select the number of a line card's slot. The corresponding subscriber port setup
screen for the type of line card you selected automatically displays.
Select the number of a DSL port on the line card.
Click Load to display the port's settings in the fields below.
Select this check box to turn on this port.
Select the port's ADSL operational mode. Select the mode that the subscriber's
device uses or auto to have the system automatically determine the mode to use.
See Table 76 on page 209 for information on the individual ADSL modes.
Select a profile of ADSL settings (such as the transfer rate, interleave delay and
signal to noise ratio settings) to assign to this port. Use the ADSL Profile screen
to configure ADSL port profiles.
Select an alarm profile to define the thresholds that trigger an alarm on the port
when exceeded.
Enter information to identify the subscriber connected to this ADSL port. You can
use up to 31 printable English keyboard characters (including spaces and
hyphens).
Enter information to identify the telephone number of the subscriber connected to
this ADSL port. You can use up to 15 English keyboard characters (including
spaces and hyphens).
Click the Setup button to open a screen where you can configure the ADSL port's
detailed settings.
Chapter 11 Subscriber Port Setup Screens
215