ZyXEL Communications MSC1024G Series User Manual page 253

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Figure 153 PVC Setup

The following table describes the fields in this screen.

Table 101 PVC Setup

MSC1000G/1024G/1224G Series User's Guide

This table displays the PVCs that are configured for the selected port.

Select the number of a line card's slot. The corresponding subscriber port setup screen

for the type of line card you selected automatically displays.

Select the number of a DSL port on the line card.

Click Load to display the port's PVC settings in the PVC Table.

This is the number of the PVC on this port. Click a number to open a screen where you

can add the PVC to more VLANs (or remove it from VLANs).

This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The

VPI and VCI identify a channel on this port.

This field displays the ATM profile that this channel uses.

This field displays the encapsulation type (llc or vc) for this channel.

This field shows that the channel is a PVC.

This field displays the PVID (Port VLAN ID) to assign to untagged frames received on

this channel.

Chapter 11 Subscriber Port Setup Screens

Troubleshooting

Msc1224g series Msc1000g series