Vdsl Port Setup - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Chapter 11 Subscriber Port Setup Screens

11.8 VDSL Port Setup

Click Port > VDSL in the navigation panel to open the following screen. Use this screen to

configure settings for individual VDSL ports on VLCs that follow the VDSL1 MIB as defined

in ADSL Extension Line MIB (RFC 3440).

Figure 132 VDSL Port Setup

The following table describes the fields in this screen.

Table 84 VDSL Port Setup

VDSL Profile

Select the number of a line card's slot. The corresponding subscriber port setup

screen for the type of line card you selected automatically displays.

Select the number of a DSL port on the line card.

Click Load to display the port's settings in the fields below.

Select this check box to turn on this port.

Select a VDSL line profile to assign to this port. Use the VDSL Profile screen to

configure VDSL port profiles.

Select a profile defined by the VDSL standard from the drop-down list box. Refer

Table 11.2.4 on page 210

Specify a band plan in this field.

Select 997 for symmetric connections.

Select 998 for asymmetric connections.

for profile information.

MSC1000G/1024G/1224G Series User's Guide

Msc1224g series Msc1000g series