Table of Contents
Advertisement
Figure 270 Port Statistics
The following table describes the labels in this screen.
Table 184 Port Statistics
LABEL
ID
State
Card Type
Uptime
Firmware
14.11.1 MSC Port Statistics
Click the slot ID for an MSC card in the Port Statistics screen to view Ethernet port status and
statistics.
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This column lists the slot numbers of the cards. Click the ID number of an active
card to go to a screen where you can view port status and statistics.
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could
be due to the card starting, a firmware upgrade in progress or a malfunction. See
Section 39.7 on page 974
for what to do if the line card stays stuck in the inactive
state.
This field displays the type of a card.
This field displays how long the card has been running since the last time it was
started.
This field displays the current firmware version installed on the card.
Chapter 14 Statistics Screens
407
Advertisement
Table of Contents
Troubleshooting
