ZyXEL Communications MSC1024G Series User Manual page 691

Table 325 port Commands (continued)
COMMAND
enet bandwidth
dot3ad
flowctrl
frametype
priority
pvid
ratelimit
show
tls
vlan
MSC1000G/1024G/1224G Series User's Guide
<slot-port>
<ingress-rate>
<egress-rate>
aggport
<slot-port>
t1|t2|...|t10|none
disable <slot>
t1|t2|...|t10
enable
<slot> t1|t2|...|t10
[lacp]
show <slot>
disable <slot-
port>
enable <slot-port>
<slot-port>
all|tag
<slot-port>
<priority>
<slot-port> <vid>
<slot-port> <rate-
limit_profile>
<slot-port>
disable <slot-
port>
enable <slot-port>
set <slot-port>
<svid> <spriority>
show <slot-port>
<slot-port> <vid>
<registration>
<tag>
Chapter 31 port Commands
DESCRIPTION
Sets the incoming or outgoing bandwidth
control for the specified Ethernet (ELC)
subscriber port(s) (0~99968 Kbps).
ingress-rate: The incoming bandwidth
rate on a port.
egress-rate: The outgoing bandwidth
rate on a port.
Creates a link aggregation trunk group for
Ethernet (ELC) subscriber ports.
Turns off link aggregation on the specified
subscriber port trunk group.
Turns on link aggregation on the specified
subscriber port trunk group.
LACP protocol.
Displays Ethernet (ELC) subscriber port
link aggregation settings.
Turns off flow control on an Ethernet (ELC)
subscriber port.
Turns on flow control on Ethernet (ELC)
subscriber port.
Sets the Ethernet (ELC) subscriber port(s)
to accept VLAN tagged and untagged
Ethernet frames or only tagged.
Sets the Ethernet subscriber port(s) priority
(0~7). 0 is the lowest priority level and 7 is
the highest.
Sets the port VID on the Ethernet
subscriber port(s).
Sets the specified Ethernet port(s) to use a
profile of egress and ingress rate settings.
Displays the settings of the specified
Ethernet subscriber port(s).
Disables Transparent LAN Service (TLS)
on the specified Ethernet subscriber
port(s). The system does not insert
additional VLAN tags to packets.
Turns on TLS to insert additional VLAN
tags to packets.
Sets/changes TLS settings on the
specified Ethernet subscriber port(s).
svid: The service provider VLAN ID.
spriority: The service provider IEEE
802.1p priority setting.
Displays the TLS settings of the specified
Ethernet subscriber port(s).
Sets the VLAN attributes of the specified
Ethernet subscriber port(s).
P
M
M
M
M
turns on
lacp
L
M
M
M
M
M
M
L
M
M
M
L
M
691