Media Interface Statistics - ZyXEL Communications MSC1024G Series User Manual

Chapter 14 Statistics Screens
The following table describes the labels in this screen.
Table 215 H.248 Interface Statistics
LABEL
ID
MG State
Protection State
Redundant State
14.18.1 H.248 Media Interface Statistics
To view a H.248 interface's list of media cards and each one's status, click Statistics > H248
and then an H.248 interface's ID.
Figure 304 H.248 Media Interface Statistics
The following table describes the labels in this screen.
Table 216 H.248 Media Interface Statistics
LABEL
Media
Slot
Media IP
State
Management
Inband IP
446
DESCRIPTION
Click the number of an H.248 interface to view information about its media
gateway cards.
This is the H.248 interface's current media gateway status (registering,
registered, disconnected, or disable).
This shows whether or not the H.248 interface's signaling card is active (invalid,
active, or standby).
This shows the connection status between the H.248 interface's active and
standby signaling cards. The status can be out-of-sync, authorization,
synchronizing, or in-service.
DESCRIPTION
Click the number of a media card to view its status details.
This is the slot where the media card is located.
This is the IP address of the media card.
This is the media card's current status in relation to the signaling card
(unregistered, registered, invalid, or unknown).
This is the inband IP address of the MSC in the same chassis as the media card.
MSC1000G/1024G/1224G Series User's Guide