Pvc Setup Slot Screen - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Table 101 PVC Setup (continued)

11.12.1 PVC Setup Slot Screen

Click Port > PVC in the navigation panel to open the PVC Setup screen. Click an active

ADSL or SHDSL line card's ID number to open the following screen. Use this screen to view

and delete PVCs from the line card's DSL ports.

Figure 155 PVC Setup: Slot

The following table describes the fields in this screen.

Table 102 PVC Setup: Slot

MSC1000G/1024G/1224G Series User's Guide

Click Cancel to begin configuring the screen again.

This column lists the slot numbers of the line cards. Click the ID number of an active

DSL line card to go to a screen where you can view and delete PVCs from the line

card's DSL ports.

This field displays the line card's current operational status.

active means the line card is operating normally.

init means the MSC is initializing the line card.

disable means a manager has disabled the line card.

inactive means the line card is starting up or is not operating normally. This could be

due to the card starting, a firmware upgrade in progress or a malfunction. See

39.7 on page 974

for what to do if the line card stays stuck in the inactive state.

This field displays the type of a line card.

This field displays how long the line card has been running since the last time it was

This field displays the current firmware version installed on the line card.

Click this to return to the previous screen.

Click Delete to remove the selected PVC(s).

This is the number of the PVC. Click a number to open a screen where you can

add the PVC to more VLANs (or remove it from VLANs).

This is the number of a DSL port on the line card.

This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier

(VCI). The VPI and VCI identify a channel on this port.

This field displays the ATM profile that this channel uses.

This field displays the encapsulation type (llc or vc) for this channel.

This field shows that the channel is a PVC.

Chapter 11 Subscriber Port Setup Screens

Msc1224g series Msc1000g series