Chapter 35 sys Commands
35.4.7 sys snmp version Command
Syntax:
sys snmp version v2c|v3|v3v2c
where
v2c|v3|v3v2c
This command sets the system to use the specified SNMP version and access mode.
The following example configures the system to use SNMPv3 with read-only access for
SNMPv2.
ras> sys snmp version v3v2c
35.5 sys syslog Commands
Use these commands to configure the system's syslog settings.
35.5.1 sys syslog server Command
Syntax:
sys syslog server <fac> <ip-address>
where
<fac>
<ip-
address>
This command sets the syslog server's IP address and log facility.
The following example sets a syslog server log facility of 3 and IP address of 192.168.1.43.
ras> sys syslog server local3 192.168.1.43
35.5.2 sys syslog enable Command
Syntax:
sys syslog enable
926
Sets the SNMP version and access mode.
=
v2c
: SNMPv2 read/write
v3
: SNMPv3 read/write with additional user authentication and data
encryption options.
: SNMPv3 read/write and SNMPv2 read-only.
v3v2c
=
Sets the log facility (local1~local7) to log the syslog messages to a specific
file in the syslog server. See your syslog program's documentation for
details. Sets the syslog server IP address.
The IP address of the syslog server.
=
MSC1000G/1024G/1224G Series User's Guide