Alarm Vdsl2 Line Profile Setup - ZyXEL Communications MSC1024G Series User Manual

Chapter 13 Profile Screens
Table 156 Profile > Alarm VDSL2 (continued)
LABEL
Apply
New
Cancel
Index
Name
Line Alarm Profile
Line Chan Profile
Modify
Delete

13.16.1 Alarm VDSL2 Line Profile Setup

Click the LineProfile link at the top-right corner of the Alarm VDSL2 Template Setup
screen to display the screen as shown. Use this screen to view, add, edit, or delete a VDSL line
alarm profile.
The device sends an alarm trap and generates a syslog entry when the thresholds of the alarm
profile are exceeded.
Figure 225 Profile > Alarm VDSL2 > LineProfile
358
DESCRIPTION
Click Apply to save the changes in this screen to the system's volatile memory.
The system loses these changes if it is turned off or loses power, so use the
Config Save on the navigation panel and then the Save button to save your
changes to the non-volatile memory when you are done configuring.
While you are modifying a profile, you can click New to start configuring a fresh
profile without saving your changes.
Click Cancel to start configuring the screen again.
This is the index number of the alarm profile.
This field displays the descriptive name for each configured VDSL template.
This field displays the line alarm profile name for each VDSL alarm profile
template.
This field displays the channel alarm profile name for each VDSL alarm profile
template.
Select a profile's Select radio button and click Modify to edit the profile.
Select a profile's Select radio button and click Delete to remove the profile.
MSC1000G/1024G/1224G Series User's Guide