ZyXEL Communications MSC1024G Series User Manual page 242

Chapter 11 Subscriber Port Setup Screens
Figure 144 Port > VDSL2
The following table describes the fields in this screen.
Table 96 Port > VDSL2
LABEL
Slot
Port
Load
Enable
VDSL2 Template
Profile
Alarm Template
Profile
Rate Limit Profile
Customer
Information
TEL
Frame Type
242
DESCRIPTION
Select the number of a line card's slot. The corresponding subscriber port setup
screen for the type of line card you selected automatically displays.
Select the number of a DSL port on the line card.
Click Load to display the port's settings in the fields below.
Select this check box to turn on this port.
Select a VDSL2 template profile of VDSL2 settings to assign to this port. Use the
Profile > VDSL2 screen to configure VDSL port profiles.
Select an alarm profile to define the thresholds that trigger an alarm on the port
when exceeded.Use the Profile > Alarm VDSL2 screen to configure VDSL alarm
template profiles.
Select a rate limit profile to apply to the subscriber connected to this port. The
profile sets maximum speed settings for traffic coming from or going to the
subscriber. See Section 13.26 on page 393
Enter information to identify the subscriber connected to this DSL port. You can
use up to 31 printable English keyboard characters (including spaces and
hyphens).
Enter information to identify the telephone number of the subscriber connected to
this DSL port. You can use up to 15 English keyboard characters (including
spaces and hyphens).
Specify the type of frames allowed on a port. Choices are All and Tag Only.
Select all from the drop-down list box to accept all untagged or tagged frames on
this port. This is the default setting.
Select tag to accept only tagged frames on this port. All untagged frames will be
dropped.
for how to configure a profile.
MSC1000G/1024G/1224G Series User's Guide