Static Mac Multicast Slot Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 10 Multicast Screens
Table 71 Static MAC Multicast (continued)
LABEL
Port
Slot
Select

10.5.1 Static MAC Multicast Slot Screen

Click Multicast > Static MAC Multicast in the navigation panel to display the Static
Multicast screen. Type a VID and a group IP and click Apply to display entries in the first
table. Click the index number of an active line card to open the following screen. Use this
screen to set which of the line card's ports belong to the static multicast group.
Figure 119 Static MAC Multicast Slot
The following table describes the related labels in this screen.
Table 72 Static MAC Multicast Slot
LABEL
1~X
204
DESCRIPTION
This section lists the VLAN membership setting of the ports on the management
switch card. An "F" indicates that the port is a permanent member of the static
multicast group. An "X" indicates that the port is forbidden (blocked) from joining the
static multicast group. An "-" indicates that the port is a normal member and can join
the VLAN dynamically. See
This section displays the numbers of any slots that are fixed members of the static
multicast group. All other slots are represented by a "-".
Select a static multicast group's radio button and then click Modify to be able to edit
it or click Delete to remove it.
DESCRIPTION
The numbers represent the individual ports on the card.
Use the F and X radio buttons to set each port's membership in the static MAC
multicast group.
Select F to make the port a permanent member of the static MAC multicast group.
Select X to set the port to "forbidden" meaning it is always blocked from joining the
static MAC multicast group.
Use the All Fix or All Forbidden button if you want to set all of the card's ports to the
same membership status for this static MAC multicast group. See
533 for more on VLAN registration.
Table 282 on page 533 for more on VLAN registration.
MSC1000G/1024G/1224G Series User's Guide
Table 282 on page