Show Dhcp Counter Command; Show Dhcp Snoop Command; Show E1 Commands - ZyXEL Communications MSC1024G Series User Manual

Chapter 33 show Commands
The following is an example.
ras> show dot3ad
[aggregator info]
tsub:
state
members: sub1 sub2
links
syncs
tup:
state
members: up1 up2
links
syncs

33.3.6 show dhcp counter Command

Syntax:
show dhcp counter <slot>|<slot-port>
This command displays the number of DHCP related packets received on the port. The
following displays an example (refer to
ras> show dhcp counter 2-2
card name: <NULL>
port discover
----- -------- -------- -------- -------- --------
2- 2
ras>

33.3.7 show dhcp snoop Command

Syntax:
show dhcp snoop <slot-port>
This command displays the DHCP snooping table on port 2 of the line card in slot 2 (refer to
Section 5.4 on page 99
ras> show dhcp snoop 2-2
port 2-2: overflow 0
idx
--- --------------- ----------------- ------
1
ras>

33.3.8 show e1 Commands

Syntax:
show e1 status <slot-port>
832
: disable
:
:
: disable
:
:
offer request
1 2
for field descriptions).
ip mac
123.23.19.4 00:50:ba:2c:70:e1
Section 5.2 on page 96 for field descriptions).
ack overflow
1 1 0
vid
1
MSC1000G/1024G/1224G Series User's Guide