ZyXEL Communications MSC1024G Series User Manual page 317

The following table describes the fields in this screen.
Table 136 DTPVC Setup
LABEL
DTPVC Table
Slot
Group
Load
Index
VPI / VCI
Profile
Svid / Spri
Cvid / Cpri
MUX
Select
Modify
Delete
Previous 10
Previous
Page X of X
Next
Next 10
VPI/VCI
Svid/Spri
Cvid/Cpri
Profile
MUX
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This table displays the PVC settings that are configured for the selected IMA
group.
Select the number of an IMA line card's slot. The corresponding group setup
screen for the type of line card you selected automatically displays.
Select the number of an IMA group on the line card.
Click Load to display the group's PVC settings in the DTPVC Table.
This is the number of the PVC on this group.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI), if any. The VPI and VCI identify a channel on this group.
This field displays the ATM profile that this channel uses.
This field displays the Svid and Spri settings that this channel uses.
• Svid is the service provider's VLAN ID (the outer VLAN tag) that the line card
assigns to untagged frames received on this DTPVC.
• Spri is the IEEE 802.1p priority level for the service provider tag that the line
card adds to untagged frames that come in on this DTPVC. "0" is the lowest
priority level and "7" is the highest.
This field displays the Cvid and Cpri settings that this channel uses.
• Cvid is the customer VLAN ID (the inner VLAN tag) that the line card assigns
to untagged frames received on this DTPVC.
• Cpri field displays the IEEE 802.1p priority level for the customer tag that the
line card adds to untagged frames that come in on this DTPVC. "0" is the
lowest priority level and "7" is the highest.
This field displays the encapsulation type (llc or vc) for this channel.
Select a DTPVC's radio button and then use the Modify, Copy or Delete button.
Select a profile's Select radio button and click Modify to edit the PVC settings.
Select a profile's Select radio button and click Delete to remove the PVC settings.
Click Previous 10 to show the preceding 10 pages of information.
Click Previous to show the preceding screen if the information cannot be
displayed in one screen.
This identifies which page of information is displayed and the total number of
pages of information.
Click Next to show the following screen if the information cannot be displayed in
one screen.
Click Next 10 to show the following 10 pages of alarms.
Type the Virtual Path Identifier and Virtual Circuit Identifier for a channel on the
IMA group. The VPI and VCI identify a channel on this group.
SVID refers to the service provider's VLAN ID (the outer VLAN tag). Enter the
service provider ID (from 1 to 4094) for untagged frames received on this DTPVC.
Select the priority level for the service provider's VLAN ID. "0" is the lowest priority
level and "7" is the highest.
CVID refers to the customer VLAN ID (the inner VLAN tag). Enter the customer ID
(from 1 to 4094) for untagged frames received on this DTPVC.
Select the priority level for the customer VLAN ID. "0" is the lowest priority level
and "7" is the highest.
Use the drop-down list box to select an ATM profile to assign to this channel.
Select the encapsulation type (llc or vc) for this channel.
Chapter 12 IMA Screens
317