Attributes Used For Accounting - ZyXEL Communications MSC1024G Series User Manual

16.10.1.3 Attributes Used by the IEEE 802.1x Authentication
User-Name
NAS-Identifier
NAS-IP-Address
NAS-Port
NAS-Port-Type
- This value is set to Ethernet(15) on the system.
Calling-Station-Id
Frame-MTU
EAP-Message
State
Message-Authenticator

16.10.2 Attributes Used for Accounting

The following sections list the attributes sent from the system to the RADIUS server when
performing authentication.
16.10.2.1 Attributes Used for Accounting System Events
NAS-IP-Address
NAS-Identifier
Acct-Status-Type
Acct-Session-ID
- The format of Acct-Session-Id is date+time+8-digit sequential number, for
example, 2007041917210300000001. (date: 2007/04/19, time: 17:21:03, serial
number: 00000001)
Acct-Delay-Time
16.10.2.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are sent (the
difference between Console and Telnet/SSH Exec events is that the Telnet/SSH events utilize
the Calling-Station-Id attribute):
Table 279 RADIUS Attributes - Exec Events via Console
ATTRIBUTE
User-Name
NAS-Identifier
NAS-IP-Address
Service-Type
Acct-Status-Type
Acct-Delay-Time
Acct-Session-Id
Acct-Authentic
Acct-Session-Time
Acct-Terminate-Cause
MSC1000G/1024G/1224G Series User's Guide
START INTERIM-UPDATE
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y
Chapter 16 Sys Screens
STOP
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
529