ZyXEL Communications MSC1024G Series User Manual page 370

Chapter 13 Profile Screens
Figure 231 The Profile > VoIP DSP Screen
The following table describes the labels in this screen.
Table 163 The Profile > VoIP DSP Screen
LABEL
Name
Codecs Allowed
Codecs not Allowed
<<
>>
Priority +
370
DESCRIPTION
Enter a name for this DSP profile (up to 31 ASCII characters; spaces are
not allowed).
This is the list of codecs to use in negotiation for this DSP profile. The
codecs are listed by priority: the system tries to use the codec at the top of
the list first and, if that is not possible, tries the second, and so on.
This is the list of codecs supported by the system but not used in this DSP
profile.
Use this to move the selected codec from the Not Allowed list to the
Allowed list.
Use this to move the selected codec from the Allowed list to the Not
Allowed list.
Use this to increase the priority of the selected codec by moving it up one
place in the list.
MSC1000G/1024G/1224G Series User's Guide