ZyXEL NWD-370N User's Guide
The following table describes the NWD-370N.
Table 1 External View
LABEL
A
B
C
The following table describes the operation of the LEDs on the device.
Table 2 NWD-370N LEDs
STATE
The LEDs are off
The LEDs are blinking
alternately.
The LEDs are blinking
simultaneously and regularly.
The LEDs are blinking
simultaneously and irregularly.
1.2 Application Overview
This section describes some network applications for the NWD-370N. You can either set the
network type to Infrastructure and connect to an AP or use Ad-Hoc mode and connect to a
peer computer (another wireless device in Ad-Hoc mode).
1.2.0.1 Infrastructure
To connect to a network via an access point (AP), set the NWD-370N network type to
Infrastructure. Through the AP, you can access the Internet or the wired network behind the
AP.
20
DESCRIPTION
Removable antennas
LEDs (lights)
PCI connector
DESCRIPTION
The NWD-370N is not receiving power.
The NWD-370N is receiving power and is not connected to a
wireless network.
The NWD-370N is receiving power and is connected to a wireless
network.
The NWD-370N is receiving power, is connected to a wireless
network and is sending or receiving data.
Chapter 1 Getting Started