ZyXEL Communications MSC1024G Series User Manual page 585

Table 306 acl Commands (continued)
COMMAND
dot1x
MSC1000G/1024G/1224G Series User's Guide
slot-port
enable <
flush <slot-port>
pool delete <slot-
port> <ip-
address>
set <slot-port>
<ip-address>
show <slot>|<slot-
port>
disable
enable
port control <slot-
port>
auto|auth|unauth
disable <slot-
port>
enable <slot-
port>
period <slot-
port> <secs>
reauth <slot-
port> on|off
show <slot>
radius ip <index> <ip-
address>
port <index>
<port>
Chapter 21 acl Commands
DESCRIPTION
Activates DHCP snooping on the
>
specified subscriber port(s).
DHCP snooping allows the
system to identify and block
packets from devices using
unknown/static IP addresses.
Clears the DHCP snooping table
on the specified port(s).
Removes the static IP address
from the DHCP snooping table.
Adds a static IP address to the
DHCP snooping table. You can
add up to 3 static IP addresses
per port.
Displays the DHCP snooping
table on the specified port.
Turns off IEEE 802.1x
authentication.
Turns on IEEE 802.1x.
Sets the IEEE 802.1x port
authentication option for specific
subscriber ports.
: authentication required
auto
auth : forced authentication
unauth: forced no
authentication
Turns off IEEE 802.1x for specific
subscriber ports.
Turns on IEEE 802.1x for specific
subscriber ports.
Sets the IEEE 802.1x re-
authentication period (60~65535)
for specific subscriber ports.
Enables/disables the IEEE 802.1x
re-authentication option for
specific subscriber ports.
Displays IEEE 802.1x settings.
Sets the IP address of the
specified external RADIUS server
(1 or 2).
index: The RADIUS server
number.
Sets the external RADIUS server
port number of the specified
RADIUS server.
index: The RADIUS server
number.
P
M
M
M
M
L
M
M
M
M
M
M
M
L
M
M
585