The Sip Port Setup Line Card Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 11 Subscriber Port Setup Screens
Table 116 Port > VoIP SIP Setup Screen
LABEL
ID
State
Card Type
Up Time
Firmware

11.23 The SIP Port Setup Line Card Screen

Use this screen to see and edit the current VoIP configuration of each port on a SIP VoIP line
card. Click a line card's ID number in the Port > VoIP SIP screen. The following screen
displays.
Figure 175 The Port > VoIP SIP Setup > SIP Port Setup Line Card Screen
282
DESCRIPTION
This column displays the line card's slot number. Click a SIP line card's
number to go to the card's SIP Port Setup Line Card screen (see
11.23 on page 282) where you can see and edit all a SIP line card's VoIP
configuration in a single screen.
This displays Active if the line card is enabled, or - if a line card is not
enabled.
This displays a line card's model name.
This field displays how long the line card has been running since it was
started up.
This field displays the current firmware version installed on the line card.
MSC1000G/1024G/1224G Series User's Guide
Section