Port Ipbpvc Set Command; Port Ipbpvc Show Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 31 port Commands
An example is shown next.
ras> port ipbpvc route show all
domain
------------------------------- ------------------ --------------- ---- --
ISP1
ISP1
example3
The output values correspond to the input values of other IP bridge routing table commands.

31.22.4 port ipbpvc set Command

Syntax:
port ipbpvc set <slot-port-vpi/vci> <profile> <vid> <priority> <type>
where
<vpi/vci>
profile
<vid>
<priority>
<type>
This command allows the configuration of a PVC (permanent virtual circuit) for one or a
range of ADSL ports in an IP bridge.
The following example sets a PVC on slot 1, DSL port 10 with VPI 40, VCI 73, DEFVAL
profile, default VID 402 and priority 2. It uses LLC encapsulation over Ethernet.
ras> port ipbpvc set 1-10-40/73 DEFVAL 402 2 llc
ras> port ipbpvc show 1-10
pvc
--------------- ------- ---- --- ---------- --------------------------------
--
1-10-40/73

31.22.5 port ipbpvc show Command

Syntax:
port ipbpvc show <slot>|<slot-port>|<slot-port-vpi/vci>
728
ip/mask
0.0.0.0/0
192.169.1.0/24
192.168.4.0/24
The VPI setting can be 0 to 255. The VCI setting can be 32 to 65535 if
=
the vpi is 0 or 1 to 65535 if the vpi is not 0.
Assign an ATM profile to use for this channel's traffic shaping.
=
The default VID (1 to 4094). Each PVC must have a unique VID since
=
the system forwards traffic back to the subscribers based on the VLAN
ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p default
priority (0 to 7) to normal channels. Each PVC must have a unique VID
(since the system forwards traffic back to the subscribers based on the
VLAN ID).
This is the priority value (0 to 7) to add to incoming frames without a
=
(IEEE 802.1p) priority tag.
Specify the encapsulation type for the PVC.
=
llc and vc are for a PVC running on Ethernet (IPoE).
llc_r and vc_r are for a PVC running on ATM (IPoA).
type pvid pri ipbpvctype profile
ipb 402 2 llc
nexthop
123.23.19.254
123.23.19.249
192.168.1.244
DEFVAL
MSC1000G/1024G/1224G Series User's Guide
mtrc pr
15 0
5 0
1 -