ZyXEL Communications MSC1024G Series User Manual page 760

Chapter 32 profile Commands
Table 327 profile Commands (continued)
COMMAND
profsvr
ratelimit
760
queue <profile> <queue-
id> <pir> <cir>
<pbs> <cbs>
[<level>
weight
[<
set <profile>
<1|2|4|8>
show [profile]
map <profile>
show
mode client|server
clientlist set <ip-address>
<type>
delete <ip-
address>
show
serverset <ip-address>
sync
delete <profile>
map <profile>
set <profile>
<ingress-rate>
<egress-rate>
show [<profile>]
DESCRIPTION
Sets the PIR, CIR, PBS, CBS
parameters for an IPQoS profile.
queue-id: The queue index
beginning at 0. For example, if you
have configured 4 queues for a profile,
>]]
then you can enter a queue-id from 0
to 3.
pir: The peak rate (128~32768 kbps
in increments of 64 kbps)
cir: The committed rate (64~16384
kbps in increments of 64 kbps).
pbs: The peak burst size in bytes
(3072~65536 kbps in increments of
256 kbps).
cbs: The committed burst size in bytes
(3072~65536 kbps in increments of
256 kbps).
level: The queue's queue level (0~7).
weight: The queue's queue weight
(1~127).
Sets the number of priority queues for
a IPQoS profile. You can set 1, 2, 4 or
8 queues.
Displays all configured IPQoS profiles
or a specified profile.
Displays which ports reference this
IPQoS profile.
Displays the current profile server
setting.
Sets the profile server operation mode. M
Adds an entry to the profile server
client list.
Removes an entry from the profile
server client list.
Displays the profile server client list.
Sets the target profile server IP
address for synchronization.
Synchronizes with the profile server.
Removes the specified Ethernet
subscriber port rate limit profile.
Displays the Ethernet subscriber
port(s) to which the specified rate limit
profile is applied.
Configures an Ethernet subscriber line
ingress and egress rate profile.
Displays the name(s) of the rate limit
profile(s) you have configured. Specify
a profile to see it's details.
MSC1000G/1024G/1224G Series User's Guide
P
M
M
L
M
L
M
M
L
M
M
M
M
M
L