Configuration File Upgrade - ZyXEL Communications MSC1024G Series User Manual

• Use this command to transfer the firmware file to the management switch card that you are
using (the internal firmware file is named
ftp> put firmware.bin ras
• Use this command to transfer the firmware file to a line card or the management switch
card that you are not currently using. Use "fw-" followed by the number of the slot.
ftp> put firmware.bin fw-3
• Use this command to transfer the firmware file to all of the IES line cards of the same
type. Use "fw-" followed by ALC1248G-51, ALC1248G-53, ALC1272G-51, SLC1248G-
22, VLC1224G-41 or VOP1248G-61. The following example uploads firmware to all of
the ALC1248G-51 line cards in the IES.
ftp> put firmware.bin fw-ALC1248G-51

38.5 Configuration File Upgrade

Use an FTP or SFTP client to connect to the IES.
C:\> ftp <IES IP address>
Type your user name and press [ENTER].
User (123.23.15.86:(none)): admin
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Transfer the configuration file to the management switch card. The configuration file on your
computer (that you want to put onto the management switch card) is named
internal configuration file on the management switch card is named
ftp> put config.dat config-0
Quit FTP.
ftp> quit
Wait for the update to finish. The system restarts automatically.
MSC1000G/1024G/1224G Series User's Guide
Chapter 38 Firmware and Configuration File Maintenance
.
ras)
. The
config.dat
.
config-0
965